Fiber Optic Spectrum Analyzer Features
- Reliably Measure wavelength emissions from Lasers, Laser Diodes, & LEDs
- Characterize optical output and wavelength stability with time, temperature, and device drive current
- Options available for UV, VIS, & NIR wavelengths 190-2200nm
- High Resolutions down to 0.05nm
- Low cost, Research Grade, and portable
- New 2019! SpectraWiz Mobile App and new interface options via SMART-Control
These instruments are used to measure wavelength emissions from Lasers, Laser Diodes and LED’s into the near infrared. A fiber optic cable is used to couple the output from the test device into the spectrometer. The instrument allows characterization of the wavelength stability with time, temperature, and device drive current. Depending on your application and wavelength requirements, StellarNet can offer high resolution spectrometers up to 0.1nm resolution. Contact StellarNet for availability of other wavelength range and resolutions.
For 1310 and 1550nm laser diodes, a fiber is used to couple the ST device connector with a spectrometer input connector (SMA). Other couplings use a 600um fiber with a lens attached to a SMA bulkhead fitting that can be easily mounted in the device emission path.
The factory performs calibrations for the appropriate wavelength range of your spectrometer using NIST traceable calibration lamps (calibration service IRRAD-CAL must be ordered with spectrometer and proper measurement accessories)
Fast delivery: most system can be calibrated and shipped within 1 week after receipt of order.
Absolute calibration: accuracy within 10% at detector integration setting used for calibration.
Certificate available: documentation with NIST traceable serial numbers.
If the user has an appropriate irradiance calibration source lamp, a field re-calibration can be easily performed using the included SpectraWiz software.
- Fast delivery: most system can be calibrated and shipped within 1 week after receipt of order
- Absolute calibration: accuracy within 10% at detector integration setting used for calibration
- Certificate available: documentation with NIST traceable serial numbers.
- If the user has an appropriate irradiance calibration source lamp, a field re-calibration can be easily performed using the included SpectraWiz software
Spectrum Analyzer Sample Spectra
SpectraWiz software enables wavelength measurements of emission peaks, peak area centroid, FWHM (Full Width Half Max), and dBm.
- Fiber Optic Spectrum Analyzer Options
- SpectraWiz Software
- Interface Options
- Cosine Receptors
- Integrating Spheres
|GREEN-Wave-NIR3-14||Low cost spectrometer with slit. Range:550-840nm for 0.3nm resolution||$1948|
|GREEN-Wave-NIR3B-14||Low cost spectrometer with slit. Range:680-935nm for 0.3nm resolution||$1948|
|BLUE-Wave-NIR3-14||Miniature 16-bit spectrometer with slit. Range:550-840nm for 0.3nm resolution||$2700|
|BLUE-Wave-NIR3B-14||Miniature 16-bit spectrometer with slit. Range:680-935nm for 0.3nm resolution||$2700|
|EPP2000-NIR3-HR-14||Portable spectrometer with slit. Range:750-850nm for 0.05nm resolution More HR Models||$3000|
|Fiber Optic Accessories|
|F600-VIS-NIR||Armored fiber optic cable, 2 meters, 2 SMA connectors, 600um fiber||$140|
|CR-1||Cosine Receptor SMA attachment with 1/2 inch diameter white opaline surface to act as laser target.||$95|
|SL2-CAL||Wavelength cal /verification lamp – Mercury & Argon emission lines||$375|
Free SpectraWiz Software The powerful SpectraWiz® spectrometer software is provided free of charge with every spectrometer instrument. This includes drivers and customizable software for Windows. The SpectraWiz software is considered the “Swiss Army Knife of Spectroscopy” and may be used to accurately measure wavelength emissions, reflectance, transmission, absorption, concentrations, and absolute intensities. In addition to real-time spectroscopy, SpectraWiz® has built-in applications for SpectroRadiometry, SpectroColorimetry, ChemWiz chemistry lab concentration analyzer, and UV level monitors. Download SpectraWiz Software FREE
- Absolute intensity measurements watts/m2
- µm watts/cm2
- Lumens/m2 — LUX
- Moles per second — PAR
- Footcandles /m2
- Radiant Flux (watts) / Luminous Flux (lumens)
- xy Chromaticity, dominant wavelength, purity
- Correlated Color temperature (CCT)
- Set Power Spectral Density (PSD) range
SpectraWiz MobileTM App Software
StellarNet introduces the new SpectraWiz Mobile Application Software designed to run directly on the zAP2 or SMART-Control spectrometer interfaces and connect directly to mobile devices. Using the local access point or Wifi you can easily log in and run applications for General Spectroscopy, Radiometry, Colorimetry, and Concentration analysis.
The easy to use applications are written in python and provided free with purchase of a zAP2 or SMART-Control spectrometer upgrades. In-app purchases allow users to download source codes, which can be further customized to suite each user’s requirements. OEM customers can add their logos or additional computations and industrial customers can set their spectrometer and stream their data to PLCs or other process monitoring platforms. SMART-Control devices support RS232, 4-20mA Analog, 26 pin digital I/O, Ethernet, I2C and other options available upon request.
zAP2 Wifi Interface Upgrade
zAutomation Processor 2 (zAP2) electronics upgrade provides integrated wireless cpu with Wifi access to spectrometer. Programmable memory allows customization using popular python language. zAP2 comes pre-programmed with the latest Spectroscopy Mobile App software and StellarNet Linux Driver set.
SMART-Control Interface Upgrade
The SMART-Control device offers communication flexibility and application specific customization for any StellarNet spectrometer. This add-on interface includes an integrated CPU with 1GB RAM and many communication protocols such as RS232, SPI, 4-20mA Analog for PLCs, Digital I/O, Ethernet, Wifi and many other options. The SMART-Control allows customers to move their spectrometers into process or OEM environments and stream their selected real world data.
StellarNet Cosine Receptors-
Allow collection of collect light with an 180° field of view using demountable diffusers with ~10% loss.
The CR1-UVN is a ½” diameter near cosine receptor using sanded fused silica diffuser for 200-1700nm. Has reduced 90° FOV and low 7% loss
StellarNet Integrating Spheres allow collection of light with an 180 field of view. The IC2 is a 2″ internal diameter sphere with 2 SMA connectors for illumination and collection of LED light. The input port is 5/8″. The IS6 and IS12 are 6″ and 12″ StellarNet integrating spheres with 2.5″ input port with internal white coating. Mounting tripods and other accessories are available for LED measurement.
Technical Information Request
Air Quality Researchers get a Practical Mobile Spectroscopic Solution from Bubbleology Research International (BRI)
For air quality testing, Bubbleology Research International (BRI) provides a spectroscopic and in situ solution on a mobile platform that leverages the strengths of traditional sampling methods – the mobility of satellite measurements with the...read more