High Resolution Spectrometer Features
- Resolutions better than 0.1nm
- Double the resolution over standard models
- UV-VIS and High Resolution NIR options
- Units are stackable for wide range analysis
- Interchangeable Slit upgrade Options for HR Optics – Now available!
TEC and TEC-X2 Upgrade Capability – Optical housing includes sealed and isolated detector enclosure with specialized heat sink and air flow design for added stability and cool operation. Thermoelectric detector cooling improves the stability of the detector for lengthy measurements where thermal noise can distort and override signal. 1-stage TEC for -15 degrees and options for upgrade to the 2-stage TEC-X2 for -30 degrees below ambient; this increases instrument S/N drastically by reducing noise over 80% at long exposures.
Interchangeable Slit upgrade Options – Now available! Modification to your spectrometer’s optical bench input (new or old) allows access to exchangeable slits. Includes pack of 14, 25 50, 100, 200um slits. 14um for best resolution and 200um for high sensitivity applications. New slit locking technology means no hardware or screwdriver is required creating the most flexible spectrometer solution on the planet.
Ruggedized – The detachable spectrograph assembly and control electronics are protected inside a rugged metal enclosure, suitable for portable, process, lab, and field applications.
Onboard Memory with pre-set calibrations and spectrometer settings and snap shot memory to provide instantaneous spectral image from the highly sensitive CCD with 2048.
High Speed Electronic Interface can be attached directly to a computers USB port for high speed data transfer. Options for Wifi/ethernet communication available as well as other interfaces. ContactUs@StellarNet.us for more info.
High Resolution (HR) Technical Specifications
| Dynamic range: | 2000:1 with 6 decades |
| Optical resolution: | see model table – to 0.1 nm |
| Detector type: | 2048 pixel CCD/PDA |
| Detector range: | 190-1600nm |
| Pixel size: | 14 x 200um |
| Diffraction Gratings: | Holographic & ruled |
| Grating g/mm: | 300, 600, 1200, 1800, 2400 |
| Spectrograph: | f/4, High Resolution SymX-Czerny–Turner |
| Order sorting filters: | Integrated & High Pass |
| Signal to noise: | 1000:1 |
| Digitizer: | 16-bit |
| Dimensions: | Depends on specific model please Contact Us for details |
| Power: | 100mA @ 5 VDC |
| Interface Options: | USB2 or Wifi (2), RS232 (3), SPI3, 4-20mA (3) Digital I/O (3) or ethernet (3) |
| Data Transfer Speed: | 30Hz or 1000Hz (1) |
| Slit size options: | 7, 14, 25, 50, 100, 200um or Interchangeable Upgrade |
| Stray light: | <0.1% at 435nm; <0.05% at 600nm |
| Fiber optic input: | SMA-905 0.22na single fiber |
| Operating systems: | Windows and Linux (2), Andriod (2), iOS (2) |
| Software included: | SpectraWiz Program, WinSDK (C,C#,VB, Delphi), Customizable LabVIEW, VBA for Excel (CRI & LED Report) |
High Resolution Sample Spectra
HR- High Resolution Miniature spectormeter taking HgA Emission Spectrum
HR- High Resolution Miniature Spectrometer LG Plasma Emission Spectrum
High Resolution Spectrometer Models
| Spectrometer model | Wavelength Range (nm) | Grating (g/mm) | Grating Range (nm) | Dispersion (nm/pixel) | Slit-25 Res (nm) | Slit-14 Res (nm) |
|---|---|---|---|---|---|---|
| HR-UV3 | 200-300 | 2400 | 100 | 0.048 | 0.21 | 0.14 |
| HR-UV3b | 300-400 | 2400 | 100 | 0.048 | 0.21 | 0.14 |
| HR-UV4 | 200-340 | 1800 | 140 | 0.068 | 0.30 | 0.20 |
| HR-VIS | 350-750 | 600 | 400 | 0.195 | 1.20 | 0.80 |
| HR-NIR | 500-900 | 600 | 400 | 0.195 | 1.20 | 0.80 |
| HR-NIR2 | 900-1075 | 1200 | 175 | 0.085 | 0.80 | 0.40 |
| HR-NIR3 | 750-850 | 1800 | 100 | 0.049 | 0.30 | 0.20 |
| HR-NIR4 | 500-580 | 2400 | 80 | 0.039 | 0.12 | 0.08 |
LIBS Standard Resolution Spectrometer Models (LSR)
*LIBS units come with Jack-In trigger, DLENS, & High Resolution Calibrations and when multiple units are ordered together have guaranteed start and stop wavelengths for continuous measurement
Spectrometer model Wavelength Range (nm) Grating (g/mm) Grating Range (nm) Slit-14
nm res.
LSR-UV2 200-400 2400 200 0.20
LSR-VIS4 400-600 2400 200 0.20
LSR-VIS4b 600-800 2400 200 0.20
LSR-NIR3b 800-1000 2400 200 0.20
LIBS High Resolution Spectrometer Models (LHR)
*LIBS units come with Jack-In trigger, DLENS, & High Resolution Calibrations and when multiple units are ordered together have guaranteed start and stop wavelengths for continuous measurement
Spectrometer model Wavelength Range (nm) Grating (g/mm) Grating Range (nm) Slit-14
nm res.
LHR-UV3 200-300 2400 100 0.10
LHR-UV3b 300-400 2400 100 0.10
LHR-VIS3 400-500 1800 100 0.10
LHR-VIS3b 500-600 1800 100 0.10
LHR-VIS3c 600-700 1800 100 0.10
LHR-NIR3 700-800 1800 100 0.10
LHR-NIR2 800-975 1200 175 0.20
NIR High Resolution Spectrometer Models
Near-Infrared High Resolution Spectrometer Models- More NIR Spectrometer Options
Spectrometer model Wavelength Range (nm) InGaAs Pixel # Slit-25
nm res.
DS- NIR3-HR 1530-1605 512 0.40
DS- NIR3-HR 1500-1640 1024 0.40
DS-NIR2 1250-1575 512 1.3
DS- NIR2b 1150-1475 512 1.3
NIRX 1500-2200 512 2.8
NIRX 1500-2200 1024 1.4
Free SpectraWiz Software
The powerful SpectraWiz® spectrometer software is provided free of charge with every spectrometer instrument. This includes drivers and customizable software for Windows. The SpectraWiz software is considered the “Swiss Army Knife of Spectroscopy” and may be used to accurately measure wavelength emissions, reflectance, transmission, absorption, concentrations, and absolute intensities. In addition to real-time spectroscopy, SpectraWiz® has built-in applications for SpectroRadiometry, SpectroColorimetry, ChemWiz chemistry lab concentration analyzer, and UV level monitors. Download SpectraWiz Software FREE
StellarRAD for iPhone and Andriod – Light Spectral Analysis App
The StellarRAD App for all WiFi-enabled StellarNet spectrometers (zAP2 WiFi upgrade) makes real-time light measurement quick and easy. Acquire full spectrum analysis of LEDs, lamps, lasers, solar or grow lights, and just about any type of luminaire from ultra-violet through the visible and near-infrared!
This intuitive app lets users control their spectrometer and capture basic and more advanced light measurement parameters such as spectral irradiance and lumens. Colorimetric analysis such as CRI (color rendering index), CCT (correlated color temperature), xy chromaticity, and much more are included. Easily save and export your data and full spectral graph as an .IRR text data file, screenshot, and/or PDF report with all parameters listed.
SpectraWiz MobileTM for Linux/RasPi
The SpectraWiz MobileTM for Linux/RasPi is designed to run directly on the SMART-Control spectrometer interfaces or can be packaged for your your requirements. Using the local access point or WiFi you can easily log in and run applications for General Spectroscopy, Radiometry, Colorimetry, and Concentration analysis.
The easy to use applications are written in python and provided free with purchase of a SMART-Control spectrometer upgrade. Source codes can be purchased separately and can be further customized to suite each user’s requirements. OEM customers can add their logos or additional computations and industrial customers can set their spectrometer and stream their data to PLCs or other process monitoring platforms. SMART-Control devices support RS232, 4-20mA Analog, 26 pin digital I/O, Ethernet, I2C and other options available upon request.
JACK 1-In Trigger
TTL input trigger to enable spectrometer scan. $250.00
TEC-X2 Ugprade
This add-on eXtreme cooler lowers the temperature of the CCD to 30 degrees below ambient and increase instrument S/N drastically
by reducing noise over 80% at long exposures. $2,950.00
Interchangeable Slit upgrade Options
Modification to your spectrometer’s optical bench input (new or old) allows access to exchangeable slits. Includes pack of 14, 25 50, 100, 200um slits. 14um for best resolution and 200um for high sensitivity applications. $1,750.00
zAP1 Electronics Upgrade
zAutomation Processor 1 upgrade provides auto and user controllable spectral baseline and gain for maximized dynamic range and burst mode for high speed consecutive spectral capture. $450.00
zAP2 WiFi Upgrade
The zAP2 WiFi upgrade enables WiFi access to any spectrometer. Now use our new StellarRAD App on your iPhone or Android device to make real-time spectral measurements quick and easy. The zAP2 WiFi upgrade can be added to all new and some old spectrometers in the field. Once added, the spectrometer runs as normal receiving power from the computer’s USB. When you connect your zAP2 5VDC power plug, the WiFi initializes and you can connect your device. Also, the zAP2 enables USB over IP and you can run SpectraWiz wirelessly on your Windows computer. $600.00
Optional Configurations
Units may be daisy chained via USB-2 hub allowing simple configurations for dual and multi-beam process applications. 8 HR spectrometers can be operated at once!
Technical Information Request
The SpectraWizard’s Spectroscopy Application Challenge Results 2024
The SpectraWizard’s Spectroscopy Application Challenge has officially ended! Spectroscopists from all over the world competed against each other for a chance to win $5,000 in StellarCash. Check out the winning spectroscopy application below and don’t forget to check...