Spectrometers Systems Light Sources Spheres Accessories Software

Page | StellarNet.us

Price List

Miniature Spectrometers
Spectrometer Upgrades

Light Sources
Light Source Accessories and Upgrades

Fiber Optic Accessories
Fiber Optic Cables- F600, F400, Y and Splitter Fibers
Radiometric Accessories- Cosine receptors, Integrating Spheres
Probes- Reflectance probes, Dip Probes, ATR probes
Probe Holders, Reflectance Fixtures, & Accessories
Cuvette Holders and Flow Cells
Lenses and Couplers
Portability

Submit your Contact information to StellarNet
ALL prices in U.S. dollars.
Contact nearest dealer for pricing outside U.S.A.

Complete and Preconfigured Systems
Thin Film System
LIBS System
Preconfigured Radiometry System
Preconfigured Chemistry System
Preconfigured Fluorescence System
Dual DSR System for Chemistry 220-2300nm

Services
Calibration Service
Repairs
Upgrades

Software
SpectraWiz Included Free
Spectral ID Software
LabVIEW Multichannel
TFC Software

Miniature Spectrometers
SpectraWiz® Operation Software Included

	BLUE-Wave miniature fiber optic spectrometer, 2048 element CCD detector. PC interface via high speed USB-2 connection. Select model name from data sheet link below (eg: BLUE-Wave-NIR3). Price includes16-bit electronics upgrade, slit, integrated order sorting filters, and USB-2 interface cable. UV detector upgrade (UDET) =$158 , UVN detector upgrade=$500	$2,500
	BLACK-Comet Concave Grating spectrometer for UV-VIS. NO mirrors, aberration corrected, flat field provides uniform resolution! Choose model C (190-850nm) or CXR (280-900nm). Price includes 16-bit electronics upgrade, slit, UV detector upgrade (UDET), integrated order sorting filters, and USB-2 interface cable.	$2,750
	BLACK-Comet-SR Concave Grating Super Range spectrometer for UV-VIS-NIR, NO mirrors, aberration corrected, flat field provides uniform resolution! Choose model C-SR (200-1080nm) or CXR-SR (220-1100nm). Price includes16-bit electronics upgrade, slit, UV detector upgrade, integrated order sorting filters, and USB-2 interface cable.	$3,495
	BLACK-Comet-HR Concave Grating High Resolution spectrometer for UV and VIS, NO mirrors, aberration corrected, flat field provides uniform resolution! Choose model C-HR-UV (200-600nm) or C-HR-VIS (380-750nm). Price includes16-bit electronics upgrade, slit, UV detector upgrade, integrated order sorting filters, and USB-2 interface cable.	$2,750
	Silver-Nova fiber optic "Super Range" spectrometer for UV-VIS-NIR 200-1100nm. Price includes slit, UV detector upgrade, detector lens, integrated order sorting filters, composite grating mounted in large optical bench for wide range, TE cooled detector, and USB-2 interface cable.	$4,495
	DWARF-STAR NIR InGaAs fiber optic spectrometer with miniature size (5"x2"x3") and extremely robust design with 512 element PDA, range 900-1700nm, 2.5nm resolution with 25um slit, 16-bit digitizer, high speed USB-2. Price includes slit, integrated order sorting filters, +5V power supply and USB-2 interface cable. OEM pricing available!	$13,125
	DWARF-STAR NIR InGaAs fiber optic spectrometer with miniature size (5"x2"x3") and extremely robust design with 1024 element PDA, range 900-1700nm, 1.25nm resolution with 25um slit, 16-bit digitizer, high speed USB-2. Price includes slit, integrated order sorting filters, +5V power supply and USB-2 interface cable. OEM pricing available!	$17,695
	RED-Wave-NIR InGaAs fiber optic spectrometer with cooled detector, 1024 element PDA, range 1000-1700nm, 1.4nm resolution with 25um slit, 16-bit digitizer, high speed USB-2. Price includes slit, integrated order sorting filters, +5V power supply and USB-2 interface cable.	$17,695
	RED-Wave-NIRX-SR InGaAs fiber optic spectrometer with cooled detector, 512 element PDA, range 900-2300nm, 16nm resolution with 25um slit, 16bit digitizer, high speed USB-2. Price includes slit, integrated order sorting filters, +5V power supply and USB-2 interface cable. *Extremely Low Noise Detectors Currently Available!*	$18,995
	RED-Wave-NIRX-SR InGaAs fiber optic spectrometer with cooled detector, 1024 element PDA, range 900-2300nm, 8nm resolution with 25um slit, 16-bit digitizer, high speed USB-2. Price includes slit, integrated order sorting filters, +5V power supply and USB-2 interface cable.	$25,995
	WDM-Wave-NIR3-HR InGaAs fiber optic spectrometer with cooled detector 1024 element PDA, range 1500-1640nm (Telcom WDM), 0.4nm resolution with 25um slit, 16-bit digitizer, high speed USB-2. Price includes slit, integrated order sorting filters, +5V power supply and USB-2 interface cable. (512 detector = 1530-1605nm)	$17,225
	GREEN-Wave miniature fiber optic spectrometer, 2048 element CCD detector. PC interface via high speed USB-2 or parallel cable. Select model name from data sheet link below (eg: GREEN-Wave-NIR3). Price includes slit, integrated order sorting filters, and USB interface cable.	$1,948
	Raman-SR Raman Standard Resolution for 200-3200 cm^-1 @ 785nm with 8 cm^-1 resolution via CCD. PC interface via high speed USB-2 connection	$3,500
	Raman-HR Raman Standard Resolution for 200-2200 cm^-1 @ 785nm with 4 cm^-1 resolution via CCD. PC interface via high speed USB-2 connection	$4,000
	Raman-HR-TEC Raman Standard Resolution for 200-2200 cm^-1 @ 785nm with 4 cm^-1 resolution via CCD. PC interface via high speed USB-2 connection. with Thermo Electric Cooler (TEC) for best S/N with detector integration times > 10 seconds	$5,295
	EPP2000-HR High Resolution fiber optic spectrometer with 2048 element CCD detector. PC interface via high speed USB-2 or parallel cable. Select model name from data sheet link below. (eg: EPP2000-NIR2-HR). Price includes slit, UV detector upgrade (if needed), integrated order sorting filters, +5V power supply and USB-2 interface cable.	$3,000
+	Dual DSR-CXR-512 Dual detector super range concave grating spectrometer (UV-VIS, CCD) plus NIR-512 (InGaAs PDA) for 280-1700nm. See Dual-DSR Page for various models and configurations. Price includes slits, UV detector upgrade, integrated order sorting filters, +5V power supplies, and USB-2 interface cables. More options available!!!	$15,875
Spectrometer Upgrades
DLENS Adds cylindrical lens on detector window of BLUE-Wave spectrometers for 3x signal gain when using 600um or 1000um fiber optic input cables.		$150
UDET Detector upgrade for UV responsivity below 350nm		$158
TEC Adds integrated Thermo Electric Cooler (TEC) to BLACK-Comet spectrometers to allow long detector integration times (>3000ms) and improve signal to noise by 66%. Great for low light applications.		$1295
Jack 1-IN Trigger TTL Input to Enable Spectrometer Scan		$100
Custom Range Many spectrometers can be configured with a custom range. Please discuss your requirements with a StellarNet applications scientist at ContactUS. Custom orders are non-returnable and require prepayment.		$0

Light Sources

	SL1 10,000 hour Tungsten and Krypton lamp, 2800 Kelvin color temp, 350-2300nm, operation outside U.S. requires UP12V adapter.	$375
	SL1-Filter 10,000 hour Tungsten and Krypton lamp, 2800 Kelvin color temp, 350-2300nm, operation outside U.S. requires UP12V adapter. The SL1-FILTER includes a 0.5” diameter filter holder nose cone. Customers can use a variety of filters for spectral attenuation, band pass, and more. Includes Color Equalization filter to improve blue sensitivity	$595
	SL1-CUV 10,000 hour Tungsten and Krypton lamp, 2800 Kelvin color temp, 350-2300nm, operation outside U.S. requires UP12V adapter. The SL1-CUV adds a 1cm cuvette holder with integrated collimating lens.	$655
	SL1-CAL 10,000 hour Tungsten and Krypton lamp, 2800 Kelvin color temp, 350-2300nm, operation outside U.S. requires UP12V adapter. SL1-CAL light source with data CD for 300-1100nm	$750
	SL3 4,000 hour, high performance 15-watt UV Deuterium light source. Small 3 x4 x7 inch enclosure, ultra stable for spectroscopy, includes Universal Power adapter for 24 volt.	$1,495
	SL5 miniature deuterium halogen lamp for UV-VIS-NIR, 200-1700nm, shutter and lamp controls, operation outside U.S. requires UP12V adapter. Low output power recommended for absorption and transmission measurements.	$1,250
	SL5-CUV miniature deuterium halogen lamp for UV-VIS-NIR, 200-1700nm, shutter and lamp controls, operation outside U.S. requires UP12V adapter. Light source includes integrated standard 1cm cuvette holder and collimating lens with SMA-905 fiber optic interface	$1,500
	SL4-DT Miniature Deuterium and Tungsten/halogen light source for 200- 2300nm range for high output power. Enables use for reflectance measurements in a single unit. Shutter button on the front panel blocks the light output of both lamps.	$2,800
+	SL1 +SL3 The high power SL1-Filter Halogen lamp and the SL3 Deuterium lamp with DCX lens installed can easily be coupled with a fiber optic Y-bundled fiber to provide high output, stable UV-VIS-NIR light, 200-2300nm, with long bulb lifetime	$2,440
	SL1-LED Miniature fiber optic light source with replaceable LED. Includes LED-Kit with set of 6 LEDs: LED-390, LED-470, LED-502, LED-590, LED-660, LED-white	$695
	UV-LED additional UV LED for use in SL1-LED available wavelengths 295,345,365, and 390nm (check for availability). Price is per LED.	$140
	RamuLaser 785 Portable Raman Laser for 785nm with 350/499mW adjustable output and FC/APC attachment for standard Raman probe. Includes integrated LI battery with charger for 8 hour operation.	$3,395
	RamuLaser 1064 Portable Raman Laser for 1064nm with 350/499mW adjustable output and FC/APC attachment for standard Raman probe. Includes integrated LI battery with charger for 8 hour operation.	$3,395
	Laser Safety Goggles required for laser applications. Provides protection for both 785 and 1064nm lasers	$179
	Lab-LS-785 Laboratory Laser Source mainframe with one SSR-Laser-785-350 350mW 785nm Raman Laser (optional 500mW). Additional Laser Subsystem modules start @ $4200 each	$6,800
	Raman-LaProbe Portable Raman laser-probe for 785nm, 100mW output power, 0.2nm FWHM laser with integrated collection optics that includes FC-SMA905 fiber optic cable.	$3,995
	SL2 Calibration lamp with Mercury and Argon gas emission lines. Pocket size, can be operated via 9V battery (not included) or with +5VDC adapter such as our UP5V (Universal Power adapter for 5 volt - AC to DC works anywhere).	$275
Light Source Accessories and Upgrades
SL1B Replacement bulb for SL1 Tungsten light source		$50
SL3B Replacement bulb for SL3 Deuterium light source		$450
SL1-BAT optional +5VDC interface for BP1 battery operates 2 hours with spectrometer		$50
LENS-DCX Installs in filter nose base for 7-10x gain: available for SL1-Filter and SL3		$100
Filter-U330 0.5 inch diameter filter for SL3 removes deuterium spikes		$50
Filter-ND50 0.5 inch diameter 50% T neutral density filter		$50
Filter-AT7 0.5 inch diameter sanded fused silica attenuation filter ~7%T		$50
F400YBNIRUVSR 400um fiber optic Y cable bundle, 0.5 meter, solarization resistant connects SL1 + SL3		$380
SL2-YCABLE Allows operation of SL2 and spectrometer from same +5VDC power adapter.		$15

Fiber Optic Accessories

Standard Single Stand Multimode Fiber Optic cables with 2 SMA Connectors
F400-VISNIR Armored, 400um diameter single strand, multimode fiber optic cable with black PVC jacket and 2 SMA conectors-2 meter length for wavelength range 400-2200nm	$115
F400-UVVis-SR Armored, Solarization Resistant, 400um diameter single strand, multimode fiber optic cable for Deep UV application with black PVC jacket and 2 SMA connectors-2 meters length for wavelengths <400nm	$145
F600-VISNIR Armored, 600um diameter single strand, multimode fiber optic cable with black PVC jacket and 2 SMA conectors-2 meter length for wavelength range 400-2200nm	$140
F600-UVVis-SR Armored, Solarization Resistant, 600um diameter single strand, multimode fiber optic cable for Deep UV application with black PVC jacket and 2 SMA connectors-2 meters length for wavelengths <400nm	$190
F1000-VISNIR-1 Armored, 1000um diameter single strand, multimode fiber optic cable with black PVC jacket and 2 SMA conectors-1 meter length for wavelength range 400-2200nm	$160
F1000-UVVis-SR-1 Armored, Solarization Resistant, 1000um diameter single strand, multimode fiber cable for UV application with black PVC jacket and 2 SMA connectors-1 meters length for wavelengths <400nm	$170
Price Per Meter
F400 per additional meter, armored with black PVC jacket	$40
F600 per additional meter, armored with black PVC jacket	$90
F1000 per additional meter, armored with black PVC jacket	$150
Y-Fibers and Splitter Cables
F400YBNIRUVSR Y-cable bundle, 0.5 meter, 4 SR & 3 NIR fibers connects SL1+SL3 lamps	$380
F600-Y-VISNIR Armored Y cable, 1 meter, 1 SMA to 2 SMA, all for NIR	$280
F600-Y-UVSRNIR Armored Y cable, 1 meter, 1 SMA to 2 SMA, SR+NIR	$380
F600-1TO3-SR Armored splitter, 1 meter, 1 SMA to 3 SMA, all Solarization Resistant	$365
Custom Fibers StellarNet builds custom fibers to meet your application	Contact
Radiometric Accessories
CR2 Miniature cosine receptor for UV-VIS-NIR, 1/4 inch diameter with fiber optic cable attachment for irradiance measurements. Calibration performed using NIST traceable lamp operating from 200-1700nm.	$125
CR2-AP Aperture for CR2, allows intensity measurement of sources that are 10 times brighter.	$125
CRLENS Cosine receptor lens assembly reduces the field of view from 180 degrees to a small spot. Adjustable focus allows variable distance from target surface	$250
CR2-RA is a 90° right-angle Cosine Receptor cube	$375
CR2-OR Miniature cosine receptor for UV-VIS-NIR1/4 inch diameter with fiber optic cable attachment for irradiance measurements with O-Ring seal for underwater applications	$175
CR2-TP miniature Tri-Pod stand for CR2 with 3 folding legs, setup any orientation, case included.	$49
IC2 Integrating Cube (Light Sphere), 2 inch cube with 5/8 inch input port, 1 SMA fiber output, Munsell white coating	$495
IC2-TP miniature Tri-Pod stand for IC2 with 3 folding legs, setup any orientation, case included	$49
IS6 is a 6” integrating sphere with a 2.0” input port, 1 SMA fiber optic output, and internal white coating.	$1,745
IS-Lamp is a Calibrated Miniature 10 Watt fiber optic VIS-NIR light source for the IS6 mounted on a 2" port cap, 400-1050nm, NIST traceable. Includes lamp with data file used to calibrate the system for total flux measurements in watts/nm and lumens/nm.	$550
IS-SMA is a SMA connector mounted on a 2" port cap with internal white coating. Allows direct connect of SMA terminating optical fibers to integrating sphere	$150
IS-RED is a 2" port cap with reduced sized 1" diameter aperture with internal white coating	$150
IS12 is a 12” integrating sphere that allows for internal mounting of devices for light measurement such as discrete LEDs, arrays, and bulbs. The sphere opens for simple access to mounting devices. IS12 Sphere includes lamp with data file used to calibrate the system for total flux measurements in watts/nm and lumens/nm.	$3,495
Probes
R600-8-VisNIR Reflectance/Fluorescence Probe for Visible and Near IR; 7 around 1 with 600μm fibers	$495
R600-8-UVVIS-SR Reflectance/Fluorescence Probe for UV and Visible; 7 around 1 with 600μm fibers	$595
DP400-VISNIR Dip Probe for Vis-NIR	$1,595
DP400-UVVIS-SR Dip Probe for UV-Vis - solarization resistant	$1,595
DP-TIP Additional tips for DP400, specify path length of 2/5/10/20mm	$410
Raman- Probe-785 Attaches to 785nm laser via FC/APC and spectrometer via SMA 905, has integrated Raman filters and optics (working distance- 4.5mm), high efficiency collection fibers for StellarNet Raman spectrometers	$2,995
Raman- Probe-1064 Attaches to 1064nm laser via FC/APC and spectrometer via SMA 905, has integrated Raman filters and optics (working distance- 4.5mm), high efficiency collection fibers for StellarNet Raman spectrometers	$2,995
SATR Industrial Sapphire ATR Probe, 230-2200nm, index of refraction up to 1.5 (-50 to 260 deg C max 1200 psi), 3 meter, 7x200 illuminate & 7x200um read	$4,595
DRP1 Industrial Diffuse Reflectance Process Probe, 3 meter, 7 x400 illuminate & 1x600 read fiber, specify UV/NIR (-50 to 260 deg C max 500 psi)	$3,575
Probes Holders, Fixtures, and Accessories
RPH1 R600-8 Reflectance probe holder maintains 45 degree angle for color measurement of solids.	$65
RPH2 Reflectance Probe Holder block for 90° angle measurements	$125
RPH3 Reflectance Probe Holder stand for 90° angle measurements. Includes base plate, vertical rod, & positioning mount for R600 probes.	$275
RPH4 Raman Probe Holder Block for the Raman- Probe-785. Accepts cuvettes and solid samples.	$275
RTIP45 45° angled tip for Reflectance probes; includes locking screw for positioning	$125
RS50 Reflectance Standard, 50 mm diameter, Halon type >97% reflectance - price change 10/25/11	$225
RSHR High-reflectivity Specular Reflectance Standard is a mirrored, fused-silica standard that can be used as a reference when measuring surfaces with high specular reflectance	$225
RFX-1 VIS-NIR Reflectance Fixture with integrated 10 watt halogen bulb	$295
RFX-2 VIS-NIR Reflectance Fixture with integrated 10,000 hour 5 watt halogen bulb for color measurements	$495
TXF-1 Transmission fixture with 1cm gap for sample insertion. 2 way fiber attachment includes 2 LENS-QCOL collimators. Measures sample transmittance and allows absorbance measurement of 1cm cuvettes.	$450
TXF-4 Transmission fixture with variable path length (up to 10cm). Stands vertical only with samples placed on a shelf. Includes 2 lens collimators (see LENS-QCOL and LENS-COL).	$495
TXF-IC2 Vertical transmission fixture with variable path length, includes 1 collimating lens and 1 miniature 2" integrating sphere with 5/8" port. For thick and curved samples.	$715
RPH-3K Horizontal bar with probe mount lock -adds to TXF-4 for use as RPH-3	$100
TXF-4K Horizontal plates with 2 LENS-QCOL -adds to RPH-3 for use as TXF-4	$275
Cuvette Holders and Flow Cells
CUV1 4-way fiber optic cuvette holder for measuring absorbance, transmittance, and fluorescence. Includes 2 Lens-Q-Col	$450
CUV-F fiber optic cuvette holder for SL1-LED excitation with 2 collimating lens for measuring fluorescence. F600Y fiber included for dual pickup	$765
CUV-TEMP fiber optic cuvette holder for measuring absorbance and fluorescence. Includes temperature control from -30°C to +105 °C	$4,660
QCV-5 Package of 5 Quartz cuvettes with 1cm path length	$850
TCP1 Industrial Transmission Cell 1/4"OD flow, 1mm to 1000mm, 400um fiber, specify UV/NIR and path (-50 to 260 deg C max 3000 psi)	Start $3,500
IMFC Industrial Mini Flow Cell, 1mm bore, 1/16 tubing, specify path length 1/10/20/40mm, (-20 to 150 deg C max 5000 psi), 400um fiber 1 meter	$2,920
Lenses and Couplers
LENS-QCOL lens collimator for UV/VIS/NIR 190-2000nm, attaches to fiber tip to focus distant light into fiber tip. Screws directly in CUV1 and TXF1.	$145
LENS-COL lens collimator for VIS/NIR 350-2200nm, attaches to fiber tip to focus distant light into fiber tip. Screws directly in CUV1 and TXF1.	$135
SMA-Coupler Coupler for Direct Attach to Spectrometer	$35
Splice Bushing Coupler for 2 fiber optic cables	$15
Portability Options
Instrument Case Durable water-tight equipment case with customizable foam interior, 17 x 11 x 6 inch ID.	$136
BP1 Battery Pack, Lithium-Ion, 5400mA/h, 2 x 5V out	$399
BP2 Battery Pack, Lithium-Ion, 7400mA/h, 2 x 5V & 2 x 12V out	$795

Complete Spectrometer Systems and Preconfigured Systems
Factory installed to order with spectrometer instrumentation & software
Contact a StellarNet Sales Representative to configure your system
ContactUs@StellarNet.us

Preconfigured Radiometry System
	RAD-System Preconfigured portable SpectroRadiometer system consists of BLACK-Comet-CXR-50 spectrometer 280-900nm, CR2 cosine receptor, F600-VISNIR fiber optic cable, IRRAD-CAL calibration service performed for absolute intensity measurements, a durable water-tight equipment case, and SpectraWiz Spectroscopy Software Go to SpectroRadiometry page for more configurations	$3,400
Thin Film Measurement Systems
	StellarNet is now offering a low cost film measurement system. Supports multilayers (to 8), freestanding, rough, and both thick and thin layer structures. Includes large Library of Materials Data! Go to Thin Film page for more configurations
TF-VIS Thin Film system includes BW-VIS-25 spectrometer, range 400-1000nm, resolution <2nm, measurement thickness range 150A-20um, SL1 halogen light source, R400-7-VisNIR reflectance probe, TF1 sample fixture with probe holder, and TFC software.		$9,950
TF-C-UVIS Thin Film system includes BLK-C-25 spectrometer, range 190-850nm, resolution <2nm, measurement thickness range 50A-20um, SL3 deuterium light source, R600-8-UVVIS-SR reflectance probe, TF1 sample fixture with probe holder, and TFC software.		$11,320
TF-C-UVIS-SR Thin Film system includes BLK-CXR-SR-25 spectrometer, range 220-1100nm, resolution <2.5nm, measurement thickness range 50A-20um, SL1-Filter halogen plus SL3 deuterium light sources, R600-8-UVVIS-SR reflectance probe, TF1 sample fixture with probe holder, and TFC software.		$12,915
TF-NIR Thin Film system includes NIR-InGaAs-512-25 spectrometer, range 900-1700nm, resolution <5nm, measurement thickness range 1000A-200um, SL1 halogen light source, R400-7-VisNIR reflectance probe, TF1 sample fixture with probe holder, and TFC software.		$20,575
TF-VIS-NIR Thin film system includes dual spectrometer, range 400-1700nm, resolution <2nm VIS and <5nm NIR, measurement thickness range 150A-200um, SL1 halogen light source, R600-8-VisNIR reflectance probe, TF1 sample fixture with probe holder, and TFC software.		$23,075
TF-C-UVIS-SRN Thin Film system includes Dual spectrometers, range 200-1700nm, resolution <5nm, measurement thickness range 50A-200um, SL4 Hal+Deut light source, R600 reflectance probe, TF1 sample fixture with probe holder, and TFC software.		$25,900
Preconfigured Fluorescence System
	Fluor-System Preconfigured Fluorescence system for steady state analysis of liquid samples. System consists of BLACK-Comet-C-200 spectrometer, SL1-LED, CUV-F fluorescence cuvette holder that includes a F600-Y-VISNIR fiber optic cable, and SpectraWiz Spectroscopy Software Go to Fluorimetry page for more configurations	$4,210
Preconfigured Chemistry System
	Chem-System Preconfigured Chemistry system for absorption analysis of liquid samples. System consists of BLACK-Comet-C-25 spectrometer, SL5-CUV, F1000-UVVIS-S-1 fiber optic cable, and SpectraWiz Spectroscopy Software. Go to Chemistry page for more configurations	$4,420
Preconfigured Colorimetry System
	Color-System Preconfigured Colorimetry system for color measurements of solid samples. System consists of BLACK-Comet-CXR-100 spectrometer, SL1-Filter tungsten halogen lamp, R600-8-VisNIR reflectance probe, RS50 white reflectance standard, RPH probe holder, and SpectraWiz Spectroscopy Software. Go to Colorimetry page for more configurations	$4,030
Laser Induced Breakdown Spectroscopy (LIBS) Systems

	PORTA-LIBS-2000 Portable trace element analyzer with ND:Yag laser =>> Laser Induced Breakdown Spectroscopy. Laser generates plasma in small sample chamber and returns optical emissions to spectrometers. The SpectraWiz Spectral-ID database identifies elements. Price includes one LSR spectrometer (0.2nm resolution). Additional channels are $3000 each. Additional LHR spectrometers (0.1nm resolution) are $3500 each.	$19,995
	BW-LSR model spectrometers can be added to above LIBS system. Available options BW-UV2 (200-400nm), BW-VIS4 (400-600nm), BW-VIS4b (600-800nm), BW-NIR3b (800-1000nm). Each unit has 0.2nm resolution. Please see LIBS page for more information.	$3,000 each
	EPP2000-LHR model spectrometers can be added to above LIBS system. Available options UV3 (200-300nm), UV3b (300-400nm), VIS3 (400-500nm), VIS3b (500-600nm), VIS3c (600-700nm), NIR3 (700-800nm), and NIR2 (800-925nm). Each unit has 0.1nm resolution. Please see LIBS page for more information	$3,500 each
Preconfigured Dual Channel SpectroChemistry System
	Dual DSR-CXR-512 (Dual Detector Super Range) BLACK-Comet concave grating spectrometer plus RED-Wave NIR spectrometer with SL1-Filter lamp, F600-Y-VISNIR splitter fiber, and DP400 dip probe for in situ absorption measurements 280-2300nm. See Dual-DSR Page for more models and configurations.	$23,230

Services

Calibration Services
IRRAD-CAL Irradiance calibration service in Watts/m^2 using NIST traceable lamp that covers 300-1100nm. Requires fiber optic cable and cosine receptor attachment such as CR2, IC2, IS4, IS6, IS8, or IS20.	$250
IRRADUV-CAL Irradiance calibration service for 200-600nm. Requires UV-SR fiber optic cable and CR2 cosine receptor	$250
IRRADNIR-CAL SpectroRadiometric Calibration service for NIR range 900-1700nm	$250
RAD-CAL Radiant power calibration in Watts/nm 300-1100nm or 900-1700 nm also for LED Lumens/nm	$250
RAD-CAL-SR Radiance calibration in Watts/sr/m^2 for Candela (Cd/m^2/nm) - requires CR2-LENS	$250
IRRAD-CAL-Fast Expedited Calibration Service guaranteed <1.5 weeks. Contact for availability	$25
IRRAD-CAL-DOC Optional CAL certificate documents equipment and NIST traceable numbers	$125
Upgrades
Please contact a StellarNet Sales Representative for price information on StellarNet instrument upgrades	Contact Us
Repairs
Out of warranty repairs are to be determined after instrument return and evaluation	Contact Us

Software
SpectraWiz® executable program, DLL driver, and LabView program for Windows XP/VISTA/7

SpectraWiz® Real-time operating software for Windows 9x/XP/VISTA/7 includes integrated applications for SpectroRadiometry, traditional Spectroscopy (absorbance/transmission/reflectance), CIELAB colorimetry, LED color analysis, ChemWiz chemical concentrations, UVabc* monitors, Solar Match Monitor, episodic capture for time series analysis.(*=requires irradiance calibrations), and much more.	FREE
SpectraWiz LV® Customizable Programs in LabVIEW ver 5.x & 6.x & 7.x & 8.x - Performs AU, %T, & reflectance spectroscopy with timeline trend graphs	FREE
SpectraWiz® VBA- Customizable Visual Basic Automation (VBA) program for direct spectrometer operation from Excel spreadsheet. Setup and run from Excel in absorbance, transmission, or scope mode.	FREE
NIST-VBA Special version of NISTs Excel spreadsheet to measure CRI and CQS of white LEDs & lamp in "real-time" on WinXP	FREE
SpectraWiz® source code "demo" program in Borland Delphi Pascal for spectral display & capture, episodic time capture and conversion for Excel	FREE
SpectraWiz LV® program in LabVIEW ver 7.x & 8.x - controls up to 8 simultaneous spectrometers & radiometers - includes source diagram and is compatible with Wizard-Runtime engine for chemometrics models	$1,500
SpectraWiz-ID SpectraWiz software with Spectral-ID application. Includes spectral emission database to identify unknown elemental peaks. SpectraWiz operates with up to 8 simultaneous spectrometer channels.	$1,500
ChemWiz-ADK Chemometric model builder plus runtime engine	$3500
Wizard-Runtime Runtime engine for chemometric models – one license only	$1500

Prices are subject to change without notice. F.O.B. Tampa, Florida. Payment terms NET 30 days with established credit.
Spectrometer spectral range may be +/-10nm from specification start and end. Please provide specific requirements to StellarNet Sales engineers prior to placements of order if you have specific spectral range requests.

*** 30% surcharge applied to ALL ACCESSORY items purchased WITHOUT spectrometer instrumentation. ***
Items may be returned within 30 days for credit less shipping costs plus a 10% evaluation fee.
Custom items are non-returnable, including but not limited to Raman & NIR instrumentation as well as Software.
Please refer to the Official StellarNet Terms of Sale

Enter Your Contact Information

Reach us at +1-813.855.8687 • Fax +1- 813.855.0394

Products Price List Press Release Search Download Tech Specs Dealers Corporate Contact Us Home